89 CRX si

This a 89 CRX-Si , This is tipical LHT B16A install. It uses the LHT motor mount kit, LHT Shift linkage and the LHT Front brake upgrade. The brakes come from a JDM CRX, These have larger calipers and a 10.1" rotor instead of the factory 9.5" ( Hf has 9.0" rotor). The brake upgrade is $350 including instalation and bleeding the full brake system. The brakes will fit under a 15" wheel with no modification, with a little modification to the calipers a 14" wheel can be used. On this vehicle LHT also installed a new timming belt and Water pump ( Recomended) and new suspension.

The suspension is KYB AGX adjustable shocks and Ground control coil overs, This combination works very well and is not too expensive. This suspension setup can be purchased from LHT for $850 installed.