LHT Performance

6330 46th St. N. Unit 111 ,

Pinellas Park, FL. 33781, USA.

727-344-1800



LHT Performance Corvette Z06 Build

 





This Corvette dyno'ed at 459whp in stock form.

We're looking to make make more power, while keeping 100% driveabilty that often gets lost when modifiying.

We add a fresh look on performance.




Here's a list of parts used.

  • WCCH CNC stg 2 heads

  • Stainless exhaust valves

  • Manley springs and Titanium retainers

  • Custom grind cam (Our own specs)

  • Comp cams trunion upgrade

  • ARP head bolts

  • ARP Crank bolt

  • Manley hardened push rods 7.750"

  • Ported throttle body

  • LHT Ported intake manifold

  • LHT Headers and mid section

  • LHT Tuned




The Goal is to make power but to keep drivabilty, gas mileage and relibailty.


WCCH Stage 2 CNC Port

Manley Springs and Retainers

Intake Port

ARP Head Bolts

LS7 Rockers with Trunion Upgrade

Sound Proof Coating on Valve Covers


      

With these modifications, we're basically improving air flow.  The heads increase airflow and compression to almost 12 to 1.  The valve guides were replaced with bronze guides and stainless exhaust valves. The Manley extreme springs and light weight retainers help with valve control, and allow for the increased lift from the LHT Custom spec cam shaft.  The cam was installed and degree'd to ensure correct alignment.  New ARP cam bolts were also changed at this time.



The car now make 590whp and see's a lot of track use. It's simply a blast to drive and takes the track abuse.




Track proven reliablity and performance




Call us today to discuss your Z06 build, and a fresh look on performance

727-344-1800



Please don't hesitate to email us.